Design And Characteristics
Fermentation tanks is also called CCT (Cylindrical Conical Tank), FV (Fermentation Vessel), primary fermenter or unitank as they are used both for fermenting and sotage,keep wort fermentation or maturation.
Fermentation Tanks can be individually temperature controlled through glycol jackets and are fully equipped with accessories such as pressure relief valve, CIP cleaning ball, sample valve, manhole,etc
An efficient and consistent brewhouse is the heart of any brewery.Our two vessels brewhouse system basicly contains mash / lauter tun, kettle/ whirlpool tun ,plate heat exchanger,pump and hot liquor tank use in the creation of hopped wort for f ermentation.
Technical Details
| Combination |
Mash/Lauter Tun/Hot Liquor Tank Combination vessel
+ Boiling Kettle/Whirlpool Tun
Mash/Lauter Tun, Boiling/Whirlpool Tun or Customized
|
| Insulation |
Polyurethane, Thickness: 1.5mm |
| Material |
Interior: Stainless steel 304, thickness 3.0mm
Exterior: Stainless steel 304, thickness 2.0mm |
| Surface |
Surface brushed; Polish treatment |
| Polish |
0.4µm |
| Controlling |
Individually temperature controlled by PLC |
| Cleaning |
CIP spray ball in the center of the inside tank |
| Bottom cone |
60-90 degree |
| Cooling |
Dimple plate or glycol cooling jacket around tank |
| Manway |
Top manway or Side manway according to the tank size |
| Temperature Measurement |
Platinum resistance & Direct reading thermometer
Display temperature from intelligent data meter |
| Welding |
Perfect TIG welding; Ra <=0.4 μm |
| Pressure |
Automatic control electric connected pressure gauge |
| Tank pressure |
Design pressure 0.3MPa; Working pressure 0.2Mpa |
| Optional Part |
Top hop additional port / CO2 stone |
Our Service
Samples
Buyer bear the air fee, but this fee will be reduced from order directly
Delivery
Never delay delivery time
After Sales
Please contact our After-sales service department in time within 30days after you received the cargo.
Tel:+86 15988775005,Working Time: 9:00 a.m.- 6:00 p.m. (Beijing time)
Process
Please provide the copy of Sales Contract and describe the problems appeared.
Slight problem
Please send the proof to our After-Sales Department, we will reply within two days.
Serious problem
1. We will dispatch our Quality and Problems Appraisers to make a confirmation
2. Have a negotiation of the compensation and sign agreements
3. Our After-Sales Department will perform the duties as the agreements
Replacement
Free replacement if there is any quality problem
