Design And Characteristics
Bright beer tanks,also called brite tank, serve to mature, clarify, and carbonate the beer after fermentation. They are key components in the production of beer which are the ﬁnal stop in the brewing process after leaving the brewhouse and fermenters. They can also be used for both the storage of ﬁnished beer for later canning, bottling, and kegging and as serving vessels allowing unpackaged beer to be poured and served directly from the brigt beer tank.
Horizontal bright beer tanks The advantage is saving place. In the same area we can place a greater number of tanks, several rows one above another. But it is diﬃcult to clean the tanks stored too low or too high.
Interior: Stainless steel 304, thickness 3.0mm
Exterior: Stainless steel 304, thickness 2.0mm
|Polyurethane, Thickness: 1.5mm
|Dimpled plate on cone and side
|Surface brushed; Polish treatment
|Individually temperature controlled by PLC
|CIP spray ball in the center of the inside tank
|Dimple plate or glycol cooling jacket around tank
|Platinum resistance thermometer
|Perfect TIG welding; Ra <=0.4 μm
|Automatic control electric connected pressure gauge
|Design pressure 0.3MPa; Working pressure 0.2Mpa
|Top hop additional port / CO2 stone
Buyer bear the air fee, but this fee will be reduced from order directly
Never delay delivery time
Please contact our After-sales service department in time within 30days after you received the cargo.
Tel:+86 15988775005,Working Time: 9:00 a.m.- 6:00 p.m. (Beijing time)
Please provide the copy of Sales Contract and describe the problems appeared.
Please send the proof to our After-Sales Department, we will reply within two days.
1. We will dispatch our Quality and Problems Appraisers to make a confirmation
2. Have a negotiation of the compensation and sign agreements
3. Our After-Sales Department will perform the duties as the agreements
Free replacement if there is any quality problem