This design ball valve consists of three pieces, one body, and two end caps.
Two caps could be the female thread, butt-welded (BW), Socket Welded(SW) Etc.
Body, Ball and Stem in stainless steel 304 or 316
Bolts, Nuts, Spring Washer etc in Stainless Steel 304
Seat Packing: Normally for PTFE (Under 120degree), 15% Fiber+PTFE, 25% Carbon Fiber + PTFE, PPL etc.
It could changed according to product medium and temperature.
Handle and Lock: Normally is in SS201, We could change it in SS304 or according to customer required.
Size: 1/2” to 2” (DN15 to DN50)
Power: Manual Operated, Locking Device is acceptable.
Thread Type: BSPT, BSP, NPT, RC/RP, PT ETC.
Medium: Water, Gasoline,Fuels, Gas etc.
Certificates: ISO9001-2015, ISO14001-2015,CE, & KC.
Leadtek could provide other special certificates if your market needed.
1.Easier disassembly and maintenance than 1 piece and 2 piece design
2.More connections ends for choosing.